Submit Content Submit an article and get published. Contact Us now.

Saturday, 10 October 2015

Guide on how to make a Carbon filtering sploof

Wepush Clouds  |  at  19:38:00  |  ,  | 

How To: Making an  efficient and durable carbon-filtering sploof

I'm going to tell you how to make what is, as far as I'm concerned, the ultimate sploof. I've seen other carbon filter designs around the net but this one is far better. This things doesn't cover up the smell of your exhaled smoke, it eliminates it--and is extremely easy to make, durable, and cheap--everything needed to make it can be gotten for under 10 bucks.

-1-1/2" by 6" plastic extension tube for sink -  the picture on the website is of the 12" one
-1-1/2" threaded PVC cap
-Activated carbon - I went to walmart but can be found at pet stores too
-Dryer sheets


First rinse about a half cup of the activated charcoal and let it dry to get rid of the charcoal dust. Then start drilling holes on the top of the PVC cap. I used a 1.98mm bit and drilled about 50 holes spaced evenly.
 Test it out by blowing through it every once in a while and make sure air comes out easily. Cut out a circular piece of a dryer sheet to sit in the bottom of the cap and keep the carbon granules from falling through the holes. When you're done, remove the plastic ring from the extension tube and screw the cap onto it tightly. When the activated charcoal is dry, pour it down through the mouthpiece of the sploof to about an inch to an inch and a half. Lastly, stuff a dryer sheet down with the charcoal and tamp it down with something to make sure none of it falls out. And then you're done.

One of the advantages of this sploof is that it's really easy to replace the carbon when it gets old--just unscrew the two pieces over a trash can and empty the carbon. Comment and tell me what you think!


We have guides, how-to's, munchies, pics, videos and more...


© 2013 Wepushclouds. WP Wepushclouds Converted by Stoner Tourism
Always Stoned. Powered by Weed.